![]() |
Routines |
| Prev: E000 | Up: Map | Next: E791 |
|
Used by the routine at Dispatch_Phase_One.
For each occupied slot at Slot_Table, calls Plot_Pixel if the calculated point is in range.
|
||||
| Draw_Slot_Table | E700 | LD HL,($EE18) | Stash *View_Range on the stack. | |
| E703 | PUSH HL | |||
| E704 | LD HL,$0010 | Write 10 to *View_Range. | ||
| E707 | LD ($EE18),HL | |||
| E70A | LD A,($EE2D) | Fetch *View_Angle. | ||
| E70D | CALL Fetch_Sine_Cosine | Call Fetch_Sine_Cosine. | ||
| E710 | LD A,($EF9D) | Fetch *Slot_Count. | ||
| E713 | LD B,A | Copy the slot count to B. | ||
| E714 | LD IX,$5B00 | Point IX at Slot_Table. | ||
|
Process one slot.
|
||||
| Draw_Slot_Table_0 | E718 | LD A,(IX+$00) | Jump to Draw_Slot_Table_2 if this slot is empty. | |
| E71B | AND A | |||
| E71C | JR Z,Draw_Slot_Table_2 | |||
| E71E | EXX | Switch to the shadow registers. | ||
| E71F | LD L,(IX+$03) | Copy the second word to *Depth. | ||
| E722 | LD H,(IX+$04) | |||
| E725 | LD ($EE12),HL | |||
| E728 | LD L,(IX+$01) | Copy the first word to *Rotated_X. | ||
| E72B | LD H,(IX+$02) | |||
| E72E | LD ($EE0E),HL | |||
| E731 | LD DE,($EE72) | Fetch *Heading. | ||
| E735 | LD A,E | Negate the coordinate. | ||
| E736 | CPL | |||
| E737 | LD E,A | |||
| E738 | LD A,D | |||
| E739 | CPL | |||
| E73A | LD D,A | |||
| E73B | INC DE | |||
| E73C | LD ($EE10),DE | Write the coordinate to *Rotated_Y. | ||
| E740 | CALL Test_In_View | Call Test_In_View. | ||
| E743 | EXX | Switch back. | ||
| E744 | JR NZ,Draw_Slot_Table_2 | Jump to Draw_Slot_Table_2 if the point is out of view. | ||
| E746 | EXX | Switch to the shadow registers. | ||
| E747 | LD DE,($EE10) | Fetch *Rotated_Y. | ||
| E74B | LD HL,($EE0E) | Fetch *Rotated_X. | ||
| E74E | CALL Rotate_Coordinates | Call Rotate_Coordinates. | ||
| E751 | LD ($EE10),DE | Write the rotated coordinate to *Rotated_Y. | ||
| E755 | LD DE,($EE12) | Fetch *Depth. | ||
| E759 | CALL Divide | Call Divide. | ||
| E75C | LD HL,$0080 | Set the offset to 80. | ||
| E75F | ADD HL,BC | Add the quotient. | ||
| E760 | INC H | Jump to Draw_Slot_Table_1 if the high byte is not zero. | ||
| E761 | DEC H | |||
| E762 | JR NZ,Draw_Slot_Table_1 | |||
| E764 | PUSH HL | Stash the coordinate on the stack. | ||
| E765 | LD DE,($EE12) | Fetch *Depth. | ||
| E769 | LD HL,($EE10) | Fetch *Rotated_Y. | ||
| E76C | CALL Divide | Call Divide. | ||
| E76F | LD HL,$0040 | Set the offset to 40. | ||
| E772 | ADD HL,BC | Add the quotient. | ||
| E773 | POP DE | Restore the other coordinate from the stack. | ||
| E774 | BIT 7,L | Jump to Draw_Slot_Table_1 if bit 7 of the low byte is set. | ||
| E776 | JR NZ,Draw_Slot_Table_1 | |||
| E778 | INC H | Jump to Draw_Slot_Table_1 if the high byte is not zero. | ||
| E779 | DEC H | |||
| E77A | JR NZ,Draw_Slot_Table_1 | |||
| E77C | LD H,L | Set the Y coordinate from the low byte. | ||
| E77D | LD L,E | Set the X coordinate from the other low byte. | ||
| E77E | LD A,(IX+$05) | Fetch the attribute. | ||
| E781 | CALL Plot_Pixel | Call Plot_Pixel. | ||
| Draw_Slot_Table_1 | E784 | EXX | Switch back to the main registers. | |
|
Next slot.
|
||||
| Draw_Slot_Table_2 | E785 | LD DE,$0006 | Advance to the next slot, and loop back to Draw_Slot_Table_0 until all slots are processed. | |
| E788 | ADD IX,DE | |||
| E78A | DJNZ Draw_Slot_Table_0 | |||
| E78C | POP HL | Restore *View_Range from the stack. | ||
| E78D | LD ($EE18),HL | |||
| E790 | RET | Return. | ||
| Prev: E000 | Up: Map | Next: E791 |